KONFIGURASI GATEWAY INTERNET menggunakan Mikrotik RB 941

KONFIGURASI ROUTER MIKROTIK 

RB-941

-         Ada Wifi

-         Dayanya lebih kecil

-         Portnya ada 4

-         Kabel Internet diport 1

-         Kabel PC (Straight) diport 2

           eth2 eth1

                                                                                                      

Langkah-langkah :

·        Colokkan Kabel Power

·        Masukkan Kabel Internet di Port 1

·        Masukkan Kabel PC (Straight) di Port 2

1.     Keadaan PC Obtain

2.     Buka Winbox Versi 3

3.     Klik System – Klik Identity – Beri Nama Router contoh : H2S

4.     Klik Interfaces, Lalu beri nama pada :

·        Ether1-internet

·        Ether2-Lan

·        Ether3-Wifi

5.     Klik IP – Klik Addres – Klik [+]

·        Ether1 : 192.0.1.5/24

·        Ether2 : 192.168.100.6/24

·        Ether3 : 192.168.200.7/24

6.     Klik IP

·        Routes – Isi Gateway : 192.0.1.1 – Apply – OK

·        DNS – Klik Tab NAT – Klik [+] – Isi Servers : 192.0.1.1

Ceklis bacaan [     ] Allow Remote Request

·        Firewall

·        Klik General – Srcnat

·        Out Interface – Internet

7.     DHCP Server

Ø DHCP Setup – ether2-lan – Next – Nex – Next – Next

Ø DHCP Setup – ether3-wifi – Next – Next – Next – Next

8.     New Terminal

o  Ping 192.0.1.1

o  Ping 8.8.8.8

o  Ping Google.com

9.     Test di CMD

o  Ping 192.0.1.1

o  Ping 8.8.8.8

o  Ping Google.com

10.                     Klik IP – Hotspot – Hotspot Setup – wlan1-wifi – Next – Next – Next – Next – Next – Next – Next – Isi Nama dan Password – Next – Next

11.                     Klilk System – Reebot

Cara Mengaktifkan Wifi pada Router Board-941

1.     Masuk New Terminal

·     Tulis “Interface Print” – Enter

·     Tulis “Interface set wlan1 disabled=no” = Enter

2.     Klik Menu Wireless - Klik Security Profiles

Isi Name : H2S

Isi General :

o  Authentication Types       WPA PSK              WPA2 PSK

o  Unicast Ciphes                    aes ccm                tkip

o  Group Ciphes                      aes ccm                tkip

o  WPA Pre-shared Key : Mutyamda

o  WPA2 Pre-shared Key : Mutyamda

3.     Klik Tab Interface – Klik Wireless

·        Double Klik Wlan1-wifi

·        Klik Wireless

§  Isi Mode                    : ap bridge

§  Band                          : 2GHz – B/G

§  Frequency                : 2432

§  SSID                           : H2S

§  Bridge Mode            : Disabled

§  Double Klik IP Address 192.168.200.5/24

§  Klik Interface – Wlan1-wifi – Apply – OK

4.     Klik IP – Klik DHCP Server – DHCP Setup – Wlan1-wifi – Next – Next – Next

5.     Test New Terminal :

§  Ping 192.0.1.1

§  Ping 8.8.8.8

§  Ping Google.com